../images/trc.gif





General Use Instructions for Agri-LITE™ Slabs

Perfect for extended season crops, tomatoes, peppers, cucumbers, roses, cut flowers

Plant Out

  1. Cut the top of the plastic for placement of the transplant blocks.
  2. Set drippers in place.
  3. We recommend the use of a wetting agent for complete initial solution distribution. Where possible, the wetting agent can be added to the irrigation solution. For small trials, the wetting agent can be applied directly to the slab before irrigation is initiated. The wetting agent used in our trials is the Amway product, "Adjuvant."
  4. 4. Fill the slab with solution.
  5. Place transplants in place and place drippers on the uphill side of the transplant block.
  6. Wait 24 hours before slitting for drainage.

Fast Track Option

If you do not have the opportunity to follow the above, the following procedure proved successful in trials.

  1. Set Agri-LITE™ slabs into position.
  2. Cut for transplant placement.
  3. Set transplants and position drippers on uphill side of the blocks.
  4. Commence irrigation on the normal cycle.
  5. Do not slit until the slab has been completely filled for at least 24 hours.

Agri-LITE™ Drainage Slit

The requirement for a reservoir within the slab is determined by a combination of factors.

First is the delivery capacity of your irrigation system.

The Agri-LITE™ does not require an internal reservoir if the delivery capacity is above 1.8 1/sq.m./hour.

For delivery systems with a lower capacity, the reservoir created by slitting should hold approximately 250 ml for each plant in the slab.

Second is the current media volume per plant.

If you maintain a reservoir in your current media, an equal per plant volume reservoir will be required in the Agri-LITE™.

If current media volume per plant is above 10 litres, a reservoir will be required in the Agri-LITE™. And in cases where the current media volume per plant results in irrigation frequency being less than once per 30 minutes on the hottest days, the Agri-LITE™ reservoir volume should be 500 ml per plant in the slab.

Back to Agri-LITE™ Hydroponics Products

See SRI Enviro-Grow System





| NEWS | Contact SRI | |
About SRI
|
All rights reserved ©2006 SRI Petro Chemical  Inc.
Telephone (905) 834-5228  Fax (905) 834-0065  Email Contacts